液晶拼接屏-03 (2) 液晶拼接屏-03 (3) 液晶拼接屏-03 (4)
液晶拼接屏-03 (2) 液晶拼接屏-03 (3) 液晶拼接屏-03 (4)

Power Dispatch Video Wall | Industrial LCD | Qtenboard

Ukuran: 43 / 46 / 49 / 55 / 65 / 75
Resolusi: 2K
Merek layar: LG/BOE/Lainnya
Celah: 8mm / 3.5mm / 1.8mm / 1.7mm / 0.88mm / 0mm

Deskripsi Produk:

Power dispatch video wall with industrial LCD splicing screens: 24/7 operation, 500-700 nits, 4K support, 0.88-3.5mm bezel and multi-signal input for SCADA, maps and camera feeds. Metal casing resists interference. OEM/SKD supply.

Rentang aplikasi:

Retail

CCTV

Pendidikan

Pertemuan

Spesifikasi Teknis:

Power Dispatch Video Wall | Industrial LCD Splicing Screen for Control Rooms
Power dispatch video wall in a utility control room showing a grid diagram

Power Dispatch Video Wall: One Shared Picture of the Whole Network

Apower dispatch video wall keeps grid diagrams, alarms, maps and substation video in front of every operator on shift. Qtenboard's industrial LCD video wall is built for that job: industrial-grade splicing screens rated for Operasi 24/7, 500-700 cd/m² brightness, 4K support and a metal casing that resists static, magnetic fields and strong interference.

Sebagai a utility control room video wall or a SCADA display wall, it shows the screens your operator workstations and visualization servers output, through HDMI, DVI, DP, VGA or BNC inputs, and brings IP camera streams in through a splicing processor. One wall can show a full-screen network diagram or many windows at once.

Qtenboard manufactures the panels itself and supplies OEM and SKD packages, so integrators can assemble locally. For general control room designs, see the industrial video wall for security control centers and the industrial splicing screen for 24/7 use.

Industrial Control Room Video Wall at a Glance

  • Panel options: 46 / 49 / 55 / 65 inch; 55" Full HD and 65" 4K (QM-6502) shown as reference
  • Bezel (seam): 0.88 / 1.7 / 3.5 mm so network diagrams and maps cross seams cleanly
  • Kecerahan: 500 cd/m², 700 cd/m² high-bright option on the 55" panel
  • Duty: built for 24/7 use, about 60,000 hours of backlight life, 0℃ to 50℃ operating range
  • Inputs: HDMI, DVI, DP, VGA, BNC (model dependent); IP streams through the processor
  • Protection: solid metal casing, anti-static, anti magnetic field, anti strong interference
  • Supply model: factory-direct, OEM / SKD

What a Dispatch or Plant Control Wall Usually Shows

Every control room is different, but most walls carry the same kinds of content. Use this table to plan sources, layouts and brightness.

ContentTypical sourcePlanning note
Network or plant diagramsSCADA / visualization workstation (DVI, HDMI, DP)Often shown full screen across several panels; choose a narrow bezel so lines crossing seams stay readable
GIS and area mapsMap server or workstationHigh resolution matters; consider 4K panels for dense maps
Alarm and event listsOperator workstationText-heavy; keep at least one window large enough to read from the back row
Substation and site videoIP cameras through decoder or processorMany small windows; see the network decoder
Load curves and KPIsDashboard or BI serverStatic for long periods; tell us your content so we can advise on image retention and brightness settings
Utility control room video wall with SCADA display and camera windows

Built for 24/7 Shifts in Critical Infrastructure

  • Backlight life: about 60,000 hours, with every panel aged for 48 hours before shipment.
  • Interference resistance: the metal casing is anti-static, anti magnetic field and anti strong interference, useful in rooms full of electrical equipment.
  • Operating range: 0℃ to 50℃ and 20%-80% humidity (non-condensing), for air-conditioned control rooms.
  • Low standby draw: ≤3 W per panel when idle.
  • Panel grade: A-grade original panels with spare-part stock and a Southeast Asia service network.
  • Dukungan: 7×24 after-sales support, including remote debugging and on-site maintenance.

For the broader reliability picture, read 24/7 industrial displays for surveillance centers and the maintenance SOP for mission-critical video walls.

Where an Industrial LCD Video Wall Is Used

Power grid dispatch and utility operations

Regional and municipal dispatch centers need one operating picture for operators and supervisors. Qtenboard supplies these rooms end to end, from panels to processor. For the same style of room, compare the LCD video wall display for operation centers and the video wall system for operation monitoring and data visualization.

Power plants, substations and process industry

Plant control rooms combine process screens with site cameras. See the LCD video wall for CCTV command center and the seamless splicing screen for command room display.

Emergency and government operation centers

Utilities often share the wall with emergency teams. See the video wall system for emergency command centers, itu LCD video wall solution for government projects and the article on LCD video wall solutions for government operation centers, which includes a 12-screen 65" example.

Transport, rail and smart city control

Related Qtenboard walls for transportation control, traffic monitoring centers Dan smart city platforms share the same panels and processors.

Control Room Video Wall Sizes: Resolution, Weight and Power

Reference builds from published panel data: the Qtenboard 55" Full HD panel (1214 × 685 mm, 26 kg, ≤220 W) and the Qtenboard 65" 4K QM-6502 panel (1432.58 × 803.62 mm, about 35 kg, ≤350 W). Final wall size depends on the bezel and the mounting frame.

BuildPanelsApprox. wall size (W × H)Equivalent diagonalCombined resolutionPanel weightMax. panel power
3x3 of 55" Full HD93642 × 2055 mmabout 165"5760 × 3240about 234 kg≤ 1,980 W
4 wide × 3 high of 55" Full HD124856 × 2055 mmabout 208"7680 × 3240about 312 kg≤ 2,640 W
4 wide × 3 high of 65" 4K125730 × 2411 mmabout 245"15360 × 6480about 420 kg≤ 4,200 W

Big walls also add heat: 4,200 W of panels releases roughly 14,300 BTU/h into the room at full load, so include cooling in the design. For a 3x3 build, see the 3x3 LCD video wall budgeting checklist.

Planning a Dispatch Center Video Wall

What Comes in an Industrial Video Wall Package

Buy the wall as a matched Qtenboard system from one factory:

Industrial LCD video wall package with processor, brackets and control software

Industrial LCD Video Wall Technical Specifications

Parameter55" Full HD panel65" 4K panel (QM-6502)
Resolusi1920 × 10803840 × 2160
Celah sambungan0.88 / 1.7 / 3.5 mm3.5mm
Kecerahan500 cd/㎡ (700 cd/㎡ option)500 cd/㎡
Rasio kontras4000:14500:1
Waktu Tanggapan8 ms6 ms
Colour Saturation97%97%
Sudut pandang178°178°
Service LifeSekitar 60,000 jam60,000 jam
AntarmukaInput: DVI, HDMI, USB; DP / VGA / BNC optionalInput: DP, VGA, HDMI, DVI, BNC, USB
Port kontrolRS232 input, RS232 output ×2; remote controlRS232 input, RS232 output ×2; remote control; third-party control optional
Konsumsi dayaOperating ≤220 W; standby ≤3 WOperating ≤350 W; standby ≤3 W
Dimensi Unit (mm)1214 × 685 × 901432.58 × 803.62 × 69
Berat Unitabout 26 kgabout 35 kg
Fungsi tampilanWhole-wall display, multi-signal split screen, any combination, subtitles; PIP / PBP / roaming / overlay optional
InstalasiCabinet type, wall hanging, embedded; floor stand and ceiling optional
StrukturSolid metal casing, anti-static, anti magnetic field, anti strong interference
Suhu operasi/kelembaban0 ℃ ~ 50 ℃ / 20% ~ 80% (non-kondensor)
Suhu penyimpanan/kelembaban-10 ℃ ~ 60 ℃/5% ~ 95% (non-kondensor)
Industrial LCD video wall manufacturer aging test line for control room panels

Factory Quality Behind an Industrial Video Wall

Qtenboard builds the screens in a 330,000 m² self-owned facility under ISO9001 quality management. Every Qtenboard panel is colour calibrated and aged for 48 hours before shipment, and the panels meet CE, FCC and RoHS requirements.

Checking suppliers for a utility tender? Use our OEM/ODM factory due diligence checklist and see the video wall manufacturer for professional displays. If you are weighing other technologies, read LCD or fine-pitch LED for your control room.

How to Order a Power Dispatch Video Wall: RFQ Checklist

Send these details to the Qtenboard team and we can quote the wall, processor and mounting together:

  1. Room and viewing distance: room size, operator positions and distance to the wall.
  2. Content: diagrams, GIS maps, alarm lists, camera windows, and how long static content stays on screen.
  3. Panel and array: 46 to 65 inch, Full HD or 4K, and the layout, for example 3x3 or 4x3.
  4. Bezel: 0.88, 1.7 or 3.5 mm.
  5. Sources: number and type of inputs (HDMI, DVI, DP, VGA, BNC, IP streams).
  6. Availability needs: UPS, spare panels, spare processor and service access.
  7. Site conditions: temperature, humidity and any electrical interference in the room.
  8. Supply model and destination: OEM or SKD, delivery country and local assembly plans.

Use the LCD video wall RFQ template for a full question list and the LCD video wall cost and TCO breakdown to compare quotes. Please contact us for a quotation.

Power Dispatch Video Wall FAQ

What is a power dispatch video wall?

It is a multi-screen LCD wall used in grid dispatch and utility control rooms to show network diagrams, maps, alarms and camera feeds on one shared display.

Can the wall display SCADA screens?

Yes. It shows whatever your SCADA or EMS workstations and visualization servers output over HDMI, DVI, DP, VGA or BNC, and the processor adds IP stream inputs. The wall does not replace your SCADA software; it displays its output.

Is LCD suitable for 24/7 dispatch use?

Yes. The panels are rated for about 60,000 hours of backlight life and aged for 48 hours before shipment. Because dispatch screens may show the same diagram for hours, tell us about your content so we can advise on image retention and brightness settings.

Which bezel should I choose for a control room wall?

Use 0.88 mm when thin lines, symbols and maps cross seams, and 3.5 mm for large walls where budget matters more. See the 55 inch LCD video wall with 0.88mm bezel for a typical Qtenboard build.

Should I choose Full HD or 4K panels?

Full HD 55" panels suit most diagrams. Choose 4K panels, such as the 65" QM-6502, when you need dense maps or many windows. A 12-panel 65" wall reaches 15360 × 6480 pixels.

How big can the wall be?

Layouts run from 2x2 up to 10x10 through the processor. Common builds are 3x3 (about 165" with 55" panels) and 4x3 (about 208" with 55" or about 245" with 65" panels).

How do I keep the wall running if a panel fails?

Hold spare panels and a spare processor, use a UPS-backed supply, and follow a maintenance routine such as the maintenance SOP for mission-critical video walls. Qtenboard offers spare-part stock and 7×24 after-sales support.

Do you offer SKD or local assembly?

Yes. We support OEM and SKD supply so system integrators can assemble the wall locally.

Can the wall be installed in a plant or substation?

The panels operate from 0℃ to 50℃ at 20%-80% non-condensing humidity, so they are intended for conditioned control rooms. If your site is harsher, send us the conditions and we will advise.

Kirim pesan:

Produk