Thông số kỹ thuật:

LCD Video Wall Floor Stand

Modular Floor-Standing Mounting Stand for 46–55" LCD Splicing Screens

Modular LCD video wall floor stand — floor-standing, no wall drilling required

Basic Product Information

Định vị lõi: A floor-mounted (non-wall-mounted) support solution purpose-built for multi-size LCD video wall installations. Unlike wall-mount brackets, this LCD video wall floor stand is fully self-supporting and sits directly on the floor, making it the go-to choice for command centers, exhibition halls, and any venue where wall drilling is not possible or not desired.

Giới thiệu sản phẩm

This LCD video wall floor stand features a thickened steel frame combined with a multi-hole adjustment structure, compatible with 46–55 inch LCD splicing screen panels in arbitrary row-column combinations (e.g., 2×2, 4×4, 5×3). As a floor standing LCD video wall mount, it combines high load-bearing capacity with splicing flexibility — no wall, no load-bearing structure, and no drilling required. Equipped with a precise leveling structure, it serves as the core support carrier for large LCD screen systems in security monitoring, commercial display, and emergency command scenarios.

Ưu điểm cốt lõi

Modular Multi-Hole Design — LCD Video Wall Mounting Stand Adaptable to Multi-Size & Multi-Panel Splicing

Close-up of multi-hole beam structure on LCD video wall mounting stand

Adopts 10mm-pitch multi-hole beams (horizontal + vertical), compatible with 46–55 inch mainstream LCD splicing screen panels, supporting arbitrary row-column combinations;
Seam accuracy ≤0.5mm, adapting to bezel tolerances of different brand LCD panels, ensuring no visual gaps across the LCD video wall.

Floor-Mounted, Drill-Free — A True LCD Video Wall Mobile Stand

Non-slip floor base pad of LCD video wall mobile stand, no drilling required

No wall load-bearing needed; the floor-standing design suits venues without load-bearing walls or temporary exhibition halls;
Equipped with non-slip foot pads — installation requires no floor damage, and as a mobile LCD video wall stand it enables quick disassembly and relocation between sites.

Thickened Steel Frame — High Load-Bearing & Deformation-Resistant LCD Video Wall Floor Bracket

Thân chính làm bằng thép dày 2.0mm (kết hợp thép Góc ống vuông), chịu tải một tấm ≥ 100kg, tải trọng tĩnh tổng thể ≥ 1000kg;
Double-layer horizontal reinforced beams + diagonal bracing structure, resistant to crowd collisions in public areas and slight equipment vibrations — no deformation during long-term use.

Quick Leveling, 60% Higher Splicing Efficiency

Pre-installed positioning buckles — 2 people can complete an 8-panel LCD video wall floor stand assembly and splicing job in 40 minutes.

Rack Structure & Load-Bearing Design

Bare frame of LCD video wall rack showing columns, beams and diagonal bracing, no screens attached

The LCD video wall rack is built around vertical steel columns connected by horizontal multi-hole beams, reinforced with diagonal bracing at the rear to resist lateral force. Key structural elements include:

Vertical columns: 2.0mm thickened square steel tube, height-adjustable to match different panel row counts;
Horizontal beams: multi-hole punched steel beams at 10mm pitch, allowing panels to be repositioned without re-drilling;
Diagonal bracing: triangulated support at the rear of the rack, improving overall rigidity and resistance to vibration or accidental impact;
Base plate & foot pads: wide-stance base plate distributes load evenly across the floor, paired with non-slip, non-marking foot pads.

Technical Parameter Table

Dimension diagram of LCD video wall floor bracket showing adjustable height and width range

Danh mục tham số	Tên tham số	Đặc điểm kỹ thuật/Mô tả đặc điểm kỹ thuật
Thông số cấu trúc	Kích thước màn hình tương thích	Mainstream 46–55 inch LCD splicing screen panels
Thông số cấu trúc	Supported Panel Arrays	Arbitrary row-column combinations, e.g. 2×2, 3×3, 4×4, 5×3
Thông số chịu tải	Single-Panel Load Capacity	≥100kg
Thông số chịu tải	Overall Static Load	≥1000kg
Precision Parameters	Splicing Seam Accuracy	≤0.5mm
Thông số vật liệu	Vật liệu chính	Cold-rolled steel, 2.0mm thickened square tube + angle steel
Thông số vật liệu	Foot Pad Type	Non-slip, non-marking foot pads (drill-free floor installation)

Installation Steps

As a modular LCD video wall installation bracket, the floor stand is designed for fast on-site assembly without professional tools. Typical installation flow:

Step 1: assemble the LCD video wall floor stand base frame

Assemble the Base Frame

Connect vertical columns and base plates on a flat floor, attach non-slip foot pads and check level.

Step 2: install multi-hole horizontal beams on LCD video wall mounting stand

Install Horizontal Beams

Fix the multi-hole horizontal beams to the columns using the pre-installed positioning buckles, matching your target row-column layout.

Step 3: mount LCD splicing screen panels onto the floor stand

Mount the LCD Panels

Attach each LCD splicing screen panel to the beam grid, working row by row to keep seams aligned.

Fine-Tune & Level

Use the leveling structure to fine-tune each panel until seam gaps are ≤0.5mm across the whole LCD video wall.

Application Industries & Scenarios

LCD video wall floor stand in an emergency command center

Công nghiệp chỉ huy khẩn cấp

Applicable to public security/fire command centers, emergency dispatch large screens; Advantage: drill-free floor installation suits temporary command sites; high load-bearing supports ultra-large-scale LCD splicing.

LCD video wall floor stand at a commercial exhibition booth

Công nghiệp triển lãm thương mại

Applicable to temporary exhibition LCD screens, brand hall digital walls; Advantage: quick disassembly and relocation, no damage to exhibition hall floors/walls; multi-hole design adapts to different screen combinations for various exhibition periods.

LCD video wall floor stand in a security monitoring center

Ngành công nghiệp giám sát an ninh

Applicable to ultra-large monitoring screens in parks/transport hubs; Advantage: floor structure suits monitoring centers without load-bearing walls; vibration resistance ensures 24/7 stable operation.

LCD video wall floor stand in a smart classroom

Công nghiệp Giáo Dục & văn hóa du lịch

Applicable to campus smart classrooms, immersive large screens in cultural tourism venues; Advantage: drill-free design avoids damaging classroom/venue decoration; multi-panel splicing supports immersive content display.

Precautions

Ensure the floor is flat before installing the LCD video wall floor stand;
Thêm trọng lượng đối trọng đáy (≥ 50kg mỗi bên) khi nối nhiều hơn 8 tấm;
Avoid sharp objects colliding with the rack frame during daily use; check the tightness of connectors regularly (every 3 months);
Remove screens first before relocating the stand, then disassemble stand components — avoid integral handling to prevent structural deformation.

Câu hỏi thường gặp

Is this LCD video wall floor stand wall-mounted or floor-standing?

This is a fully floor standing LCD video wall mount — it is self-supporting and sits directly on the floor. No wall drilling or wall load-bearing capacity is required.

What LCD panel sizes and array combinations does this LCD video wall mounting stand support?

It is compatible with mainstream 46–55 inch LCD splicing screen panels and supports arbitrary row-column combinations such as 2×2, 3×3, 4×4, or 5×3.

Can the LCD video wall mobile stand be relocated after installation?

Yes. Because it uses non-slip foot pads instead of floor drilling, the stand can be disassembled and relocated. Screens should always be removed first before moving the frame.

How much weight can this LCD video wall floor bracket support?

Each panel position supports ≥100kg, with an overall static load capacity of ≥1000kg for the full rack.

How long does it take to install this LCD video wall installation bracket?

With pre-installed positioning buckles, two installers can typically complete assembly and splicing for an 8-panel LCD video wall in about 40 minutes.